10 INCH PARABOLIC MIRROR PROFESSIONAL

Connections to which the upper cell is screwed are made of brass.Ĭomfortable collimation. The built-in stops do not allow the truss to spread too much and tip over. All elements are connected together to form a single piece which facilitates and significantly accelerates assembly.

Specially designed pipe ends connected with A2 stainless steel bolts show great resistance to wear and no backlash for many years. Properly selected diameter and cross-section of pipes guarantee high rigidity of the structure. Truss The whole grate is made of 6063 aluminum. Optionally the telescope may be equipped with a set of counterweight. However, in need for fitting of additional accessories the centre of gravity may be moved, increasing thereby the maximum load. The telescope is balanced for oculars up to 1-2 kg. This allows for comfortable observation in a sitting position and easy access for the youngest observers. The telescope is designed, so that the main mirror moves as close to the ground as possible, so that the maximum height on which the eyepiece is located is only 140 cm. This allows for convenient observation from the zenith to the horizon. The top cell can be mounted in two positions by changing the position of the focuser. A gust of wind or accidental hunch will not move the telescope.

The mounted base has a rotational resistance adjustment, so you can adjust the telescope to your preferences. During transportation individual elements are fastened one another, creating a tight chunk, which facilitates relocation and secures construction and optics. Teflon pads and bearing mounting base provides smooth and precise handling even at high magnifications. Additionally provided with a systemic solution that simplifies unscrewing (particularly useful when using thick winter gloves). There is no possibility of loosing one of them. All winders are fixed into the construction. One person may easily dismantle the telescope within a few minutes. Dismantling of the telescope is very intuitional. Secondary mirror fitting provided with a separator which prevents tensions. The opened construction allows for faster mirror cooling. It may be released at any given time for cleaning or service. An additional advantage of the floating fitting is easy access to the mirror (it is not glued). During collimation one moves the whole fitting together with the mirror it embraces, therefore the mirror has always ideal, unchanged conditions.

The whole fitting made entirely of aluminium alloy, powder painted. In horizontal position the mirror rests on a special belt in order to distribute its mass equally. Nylon lower and side supports hold mirror securely and do not cause astigmatism. The advanced mirror cell has 9, 18 or 27 support points which providing ideal weight distribution of the mirror.

Even a perfect mirror will not provide good quality images if not properly fitted. Wooden elements made of waterproof plywood covered with several layers of varnish. All elements made in CNC technology, handmade finished and assembled with the highest precision. It is not only capable of providing great images but also presents itself splendidly. Combination of modern materials and classic wood makes this telescope an evergreen.

10 INCH PARABOLIC MIRROR PROFESSIONAL

Professional mirrors are delivered with a quality certificate confirmed by test results. Hardened coating with increased efficiency 96% quarantees high efficiency of a whole optics setup. High quality optics. The professional mirror was made with the highest accuracy are available in two variants: Standard - made of borosilicate glass, aluminum reflecting layers protected with SiO2, and Professional - made of relaxed SUPREMAX® 33 glass by SCHOTT. Telescope encourages to further ventures beyond city agglomerations, in search of dark sky. After dismantling the telescope fits into trunk of a city car.

10 inch parabolic mirror